Menu
| Status | Call For Price |
Product Details:
● LED display or LCD display
● Microprocessor-based digital control
● Boost and buck AVR for voltage stabilization
● Auto-sensing frequency
● Wide input voltage range
● Power-on self-test
● Cold start
● Auto-restart when mains power is restored
| Capacity | 600VA/650VA |
| Load Capacity | 360W |
| Input Voltage | 160V-270V |
| Output Voltage | 230V ± 10% |
| Frequency | 50Hz ± 5% (Battery Mode) |
| Noise Level | Audible Noise: < 40dBA (1 meter from surface) |
| Battery | 01×12V7.5Ah |
| Frequency | 50Hz ± 5% |
| Voltage Range | 220V/230V, 160V~270V at line input |
| Backup Time | PC with LCD 17’’ monitor 10-15 minutes |
| Voltage Range | 230V ± 10% |
| Type of Wave | Mains mode: pure sine wave; Battery mode: the simulated sine wave. |
| Transfer Time | Typical 8ms, 10ms max. |
● LED display or LCD display
● Microprocessor-based digital control
● Boost and buck AVR for voltage stabilization
● Auto-sensing frequency
● Wide input voltage range
● Power-on self-test
● Cold start
● Auto-restart when mains power is restored
● Auto track mains phase to ensure that inverter output voltage has the same phase with utility voltage, reducing transfer time and peak surge
● Intelligent battery management: battery temperature compensation to extend the battery life; three-stage charging to shorten the recharge time
● Short circuit, battery overcharge / over-discharge, overload, surge protections
● Automatic charging in OFF mode
● Optional no-load shutdown
● Optional RS232 / USB communication port and RJ11 / RJ45 protection
● Unattended safety shutdown: system alarm and auto Power-On / Off by RS232 or USB interface communicating with PC
Product Details:
● LED display or LCD display
● Microprocessor-based digital control
● Boost and buck AVR for voltage stabilization
● Auto-sensing frequency
● Wide input voltage range
● Power-on self-test
● Cold start
● Auto-restart when mains power is restored
● Auto track mains phase to ensure that inverter output voltage has the same phase with utility voltage, reducing transfer time and peak surge
| Brand | SAKO |
| Capacity | 1000VA |
| Model | SVC-1000VA |
| Frequency | 50Hz ± 5% |
| Voltage Range | 220V/230V, 160V~270V at line input |
| Backup Time | 02×PC with LCD 17’’ monitor 10-15 minutes |
| Voltage Range | 230V ± 10% |
| Type of Wave | Mains mode: pure sine wave; Battery mode: the simulated sine wave. |
| Transfer Time | Typical 8ms, 10ms max. |
● LED display or LCD display
● Microprocessor-based digital control
● Boost and buck AVR for voltage stabilization
● Auto-sensing frequency
● Wide input voltage range
● Power-on self-test
● Cold start
● Auto-restart when mains power is restored
● Auto track mains phase to ensure that inverter output voltage has the same phase with utility voltage, reducing transfer time and peak surge
● Intelligent battery management: battery temperature compensation to extend the battery life; three-stage charging to shorten the recharge time
● Short circuit, battery overcharge / over-discharge, overload, surge protections
● Automatic charging in OFF mode
● Optional no-load shutdown
● Optional RS232 / USB communication port and RJ11 / RJ45 protection
● Unattended safety shutdown: system alarm and auto Power-On / Off by RS232 or USB interface communicating with PC
| Status | Call For Price |
OFFLINE UPS
| Status | Call For Price |
OFFLINE UPS
Product Details:
● LED display or LCD display
● Microprocessor-based digital control
● Boost and buck AVR for voltage stabilization
● Auto-sensing frequency
● Wide input voltage range
● Power-on self-test
● Cold start
● Auto-restart when mains power is restored
| Capacity | 2000VA |
| Load Capacity | 1200W |
| Input Voltage | 160V-270V |
| Output Voltage | 230V ± 10% |
| Frequency | 50Hz ± 5% (Battery Mode) |
| Noise Level | Audible Noise: < 40dBA (1 meter from surface) |
| Battery | 02×12V9Ah |
| Frequency | 50Hz ± 5% |
| Voltage Range | 220V/230V, 160V~270V at line input |
| Backup Time | 022×PC with LCD 17’’ monitor 20-30 minutes |
| Voltage Range | 230V ± 10% |
| Type of Wave | Mains mode: pure sine wave; Battery mode: the simulated sine wave. |
| Transfer Time | Typical 8ms, 10ms max. |
● LED display or LCD display
● Microprocessor-based digital control
● Boost and buck AVR for voltage stabilization
● Auto-sensing frequency
● Wide input voltage range
● Power-on self-test
● Cold start
● Auto-restart when mains power is restored
● Auto track mains phase to ensure that inverter output voltage has the same phase with utility voltage, reducing transfer time and peak surge
● Intelligent battery management: battery temperature compensation to extend the battery life; three-stage charging to shorten the recharge time
● Short circuit, battery overcharge / over-discharge, overload, surge protections
● Automatic charging in OFF mode
● Optional no-load shutdown
● Optional RS232 / USB communication port and RJ11 / RJ45 protection
● Unattended safety shutdown: system alarm and auto Power-On / Off by RS232 or USB interface communicating with PC